Part Number Hot Search : 
P1240 15400 200BG 1N4729 1PMT5290 LTC3245 SMCJ36 BC445
Product Description
Full Text Search
 

To Download PIC16C717 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 PIC16C717/770/771
PIC16C717/770/771 Rev. C Silicon/Data Sheet Errata
The PIC16C717/770/771 parts you have received conform functionally to the Device Data Sheet (DS41120B), except for the anomalies described below. All problems listed here will be addressed in future revisions of the PIC16C717/770/771 silicon. 1. Module: A/D Converter Exception to Table 15-12, Parameter A04. PIC16C770/771 (12-bit A/D): No missing codes to 11-bits of resolution, up to 4 non-consecutive missing codes may occur when used to 12-bits of resolution. Work around None. 2. Module: Timer1 When Timer1 is configured to operate as an asynchronous counter, care must be taken that there is no incoming pulse while the module is being turned off. If an incoming pulse arrives while Timer1 is being turned off (i.e., TMR1ON transitions from 1 to 0), the value of registers TMR1L and TMR1H will be unpredictable. Work around This solution involves changing Timer1 from Asynchronous to Synchronous mode before turning off Timer1. No additional resources are required for this solution. Timer1 synchronization will start, effectively stopping Timer1, one Q period after the Synchronous mode is enabled, or one Q period later than would have been realized by simply clearing the TMR1ON bit. One additional count, in excess of the counts accrued during this extra Q period, may be accumulated before the TMR1ON bit is eventually cleared in the next instruction. The occurrence of this additional count is dependent on the phase relationship between OSC1, or the internal system clock, and T1CKI.
CODE EXAMPLE :
************************************************************************************** ; Call this routine to stop Timer1 asynchronous counting ; ; Timer1 is stopped after the timer is changed to synchronous mode ; The captured timer value resides in TMR1H and TMR1L at the completion of this ; routine. TMR1Capture bcf T1CON,NOT_T1SYNC bcf T1CON,TMR1ON bsf T1CON,NOT_T1SYNC return ; ; ; ; ; entry point set for synchronous mode stop timer restore asynchronous mode return to calling routine
(c) 2002 Microchip Technology Inc.
DS80100C-page 1
PIC16C717/770/771
3. Module: ECCP (Compare Mode) The CCP1 output latch, observed on RB3/CCP1/ P1A, can change unexpectedly when the ECCP module is changed from a set output on match (CCP1CON<3:0> = "1000") to clear output on match (CCP1CON<3:0> = "1001") or vice versa. This condition will occur, following an ECCP Reset, at the third iteration of the following sequence: 1. 2. CCPR1<3:0> is changed from "1001" to "1000" or vice versa. The TMR1H:TMR1L register pair matches the CCP1R1H:CCPR1L register pair. The apparent inverted response will persist until the CCP1CON<3> bit is cleared (exiting Compare mode). Interrupts always occur correctly on the match condition. The error is only in the state of the CCP1 output latch. Work around Option 1 Use the ECCP toggle output on compare match mode (CCP1CON<3:0> = "0010"). Option 2 Do not selectively change the CCP1CON<0> bit. Instead, perform the following: * Set the RB3 data latch to the same state as the CCP1 output latch (movf PORTB, f) to avoid an output glitch when the CCP1CON register is cleared. * Next, clear the CCP1CON register (clrf CCP1CON). * Finally, set the CCP1CON<3:0> bits to the next desired output on Compare Match mode.
Step 1 of the third iteration will cause the CCP1 output latch to immediately, and erroneously, change to the inverse of the CCPR1<0> bit. This gives the appearance of an inverted ECCP response to the third, and subsequent, compare match events.
TABLE 1: DC SPECIFICATION DEVIATIONS FROM DATA SHEET
Param No. D005 Tested Specification Min VBOR BOR Voltage BORV<1:0> = 0100 BORV<1:0> = 0101 BORV<1:0> = 0110 BORV<1:0> = 0111 2.35 2.55 3.95 4.23 Typ -- -- -- -- Max 2.80 3.02 4.71 5.05 Data Sheet Specification Min 2.5 2.7 4.2 4.5 Typ -- -- -- -- Max 2.66 2.86 4.46 4.78 V V V V
Sym.
Characteristic
Units
TABLE 2: DC SPECIFICATION DEVIATIONS FROM DATA SHEET
Param No. D420 Tested Specification Min VLVD LVD Voltage LVV<3:0> = 0100 LVV<3:0> = 0101 LVV<3:0> = 0110 LVV<3:0> = 0111 LVV<3:0> = 1000 LVV<3:0> = 1001 LVV<3:0> = 1010 LVV<3:0> = 1011 LVV<3:0> = 1100 LVV<3:0> = 1101 LVV<3:0> = 1110 2.35 2.55 2.64 2.83 3.11 3.29 3.39 3.58 3.77 3.95 4.23 Typ -- -- -- -- -- -- -- -- -- -- -- Max 2.80 3.02 3.14 3.37 3.71 3.93 4.04 4.26 4.49 4.71 5.05 Data Sheet Specification Min 2.5 2.7 2.8 3.0 3.3 3.5 3.6 3.8 4.0 4.2 4.5 Typ -- -- -- -- -- -- -- -- -- -- -- Max 2.66 2.86 2.98 3.2 3.52 3.72 3.84 4.04 4.26 4.46 4.78 V V V V V V V V V V V
Sym.
Characteristic
Units
DS80100C-page 2
(c) 2002 Microchip Technology Inc.
PIC16C717/770/771
Clarifications/Corrections to the Data Sheet:
In the Device Data Sheet (DS41120B), the following clarifications and corrections should be noted. 1. Module: DC Characteristics Figure 15-1: TPIC16C717/770/771 VOLTAGEFREQUENCY GRAPH, -40C TA +85C; Figure title changes from +85C to +125C. 2. Module: DC Characteristics Figure 15-3: PIC16LC717/770/771 VOLTAGE-
FREQUENCY GRAPH, -40C TA 0C, +70C TA +85C;
Figure title changes from +85C to +125C.
(c) 2002 Microchip Technology Inc.
DS80100C-page 3
PIC16C717/770/771
REVISION HISTORY
Rev A Document (2/01) Original errata document. Issues 1 (A/D Converter) and 2 (Timer1 Module) were added (page 1). Item 1, Table 5-12 concerning Parameter A04, was added (page 2). Rev B Document (9/01) Issue 3 (ECCP Compare Mode), Table 1 and 2 were added (page 2). Under the Clarifications/Corrections Section, Item 1, Table 15-12 was updated with additional information (page 3). Under the Clarifications/Corrections Section, the following Items were added: Item 2, Table 15-15 concerning DC Characteristics for PIC16C717 and PIC16LC717 was updated (page 4). Item 3, Section 15.1 and Section 15.2 concerning DC Characteristics for PIC16C717/770/771 and PIC16LC717/770/771, respectively were replaced with a new Section, which contains updated information in a new format (page 5). Item 4, Table 15-11 concerning DC Characteristics for VREF was replaced with updated information (page 8). Rev C Document (8/02) Under the Data Sheet Clarifications/Corrections Section, Items 1 through 4 were incorporated into DS41120B. New Items 1 and 2 were added for clarification.
DS80100C-page 4
(c) 2002 Microchip Technology Inc.
Note the following details of the code protection feature on PICmicro(R) MCUs. * * * The PICmicro family meets the specifications contained in the Microchip Data Sheet. Microchip believes that its family of PICmicro microcontrollers is one of the most secure products of its kind on the market today, when used in the intended manner and under normal conditions. There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the PICmicro microcontroller in a manner outside the operating specifications contained in the data sheet. The person doing so may be engaged in theft of intellectual property. Microchip is willing to work with the customer who is concerned about the integrity of their code. Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as "unbreakable". Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our product.
* * *
If you have any further questions about this matter, please contact the local sales office nearest to you.
Information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. No representation or warranty is given and no liability is assumed by Microchip Technology Incorporated with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights arising from such use or otherwise. Use of Microchip's products as critical components in life support systems is not authorized except with express written approval by Microchip. No licenses are conveyed, implicitly or otherwise, under any intellectual property rights.
Trademarks The Microchip name and logo, the Microchip logo, KEELOQ, MPLAB, PIC, PICmicro, PICSTART and PRO MATE are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. FilterLab, microID, MXDEV, MXLAB, PICMASTER, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. dsPIC, dsPICDEM.net, ECONOMONITOR, FanSense, FlexROM, fuzzyLAB, In-Circuit Serial Programming, ICSP, ICEPIC, microPort, Migratable Memory, MPASM, MPLIB, MPLINK, MPSIM, PICC, PICDEM, PICDEM.net, rfPIC, Select Mode and Total Endurance are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. Serialized Quick Turn Programming (SQTP) is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. (c) 2002, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved.
Printed on recycled paper.
Microchip received QS-9000 quality system certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona in July 1999 and Mountain View, California in March 2002. The Company's quality system processes and procedures are QS-9000 compliant for its PICmicro(R) 8-bit MCUs, KEELOQ(R) code hopping devices, Serial EEPROMs, microperipherals, non-volatile memory and analog products. In addition, Microchip's quality system for the design and manufacture of development systems is ISO 9001 certified.
(c) 2002 Microchip Technology Inc.
DS80100C - page 5
WORLDWIDE SALES AND SERVICE
AMERICAS
Corporate Office
2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: 480-792-7627 Web Address: http://www.microchip.com
ASIA/PACIFIC
Australia
Microchip Technology Australia Pty Ltd Suite 22, 41 Rawson Street Epping 2121, NSW Australia Tel: 61-2-9868-6733 Fax: 61-2-9868-6755
Japan
Microchip Technology Japan K.K. Benex S-1 6F 3-18-20, Shinyokohama Kohoku-Ku, Yokohama-shi Kanagawa, 222-0033, Japan Tel: 81-45-471- 6166 Fax: 81-45-471-6122
Rocky Mountain
2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7966 Fax: 480-792-4338
China - Beijing
Microchip Technology Consulting (Shanghai) Co., Ltd., Beijing Liaison Office Unit 915 Bei Hai Wan Tai Bldg. No. 6 Chaoyangmen Beidajie Beijing, 100027, No. China Tel: 86-10-85282100 Fax: 86-10-85282104
Korea
Microchip Technology Korea 168-1, Youngbo Bldg. 3 Floor Samsung-Dong, Kangnam-Ku Seoul, Korea 135-882 Tel: 82-2-554-7200 Fax: 82-2-558-5934
Atlanta
500 Sugar Mill Road, Suite 200B Atlanta, GA 30350 Tel: 770-640-0034 Fax: 770-640-0307
Singapore
Microchip Technology Singapore Pte Ltd. 200 Middle Road #07-02 Prime Centre Singapore, 188980 Tel: 65-6334-8870 Fax: 65-6334-8850
Boston
2 Lan Drive, Suite 120 Westford, MA 01886 Tel: 978-692-3848 Fax: 978-692-3821
China - Chengdu
Microchip Technology Consulting (Shanghai) Co., Ltd., Chengdu Liaison Office Rm. 2401, 24th Floor, Ming Xing Financial Tower No. 88 TIDU Street Chengdu 610016, China Tel: 86-28-86766200 Fax: 86-28-86766599
Taiwan
Microchip Technology (Barbados) Inc., Taiwan Branch 11F-3, No. 207 Tung Hua North Road Taipei, 105, Taiwan Tel: 886-2-2717-7175 Fax: 886-2-2545-0139
Chicago
333 Pierce Road, Suite 180 Itasca, IL 60143 Tel: 630-285-0071 Fax: 630-285-0075
Dallas
4570 Westgrove Drive, Suite 160 Addison, TX 75001 Tel: 972-818-7423 Fax: 972-818-2924
China - Fuzhou
Microchip Technology Consulting (Shanghai) Co., Ltd., Fuzhou Liaison Office Unit 28F, World Trade Plaza No. 71 Wusi Road Fuzhou 350001, China Tel: 86-591-7503506 Fax: 86-591-7503521
Detroit
Tri-Atria Office Building 32255 Northwestern Highway, Suite 190 Farmington Hills, MI 48334 Tel: 248-538-2250 Fax: 248-538-2260
EUROPE
Austria
Microchip Technology Austria GmbH Durisolstrasse 2 A-4600 Wels Austria Tel: 43-7242-2244-399 Fax: 43-7242-2244-393
China - Shanghai
Microchip Technology Consulting (Shanghai) Co., Ltd. Room 701, Bldg. B Far East International Plaza No. 317 Xian Xia Road Shanghai, 200051 Tel: 86-21-6275-5700 Fax: 86-21-6275-5060
Kokomo
2767 S. Albright Road Kokomo, Indiana 46902 Tel: 765-864-8360 Fax: 765-864-8387
Denmark
Microchip Technology Nordic ApS Regus Business Centre Lautrup hoj 1-3 Ballerup DK-2750 Denmark Tel: 45 4420 9895 Fax: 45 4420 9910
Los Angeles
18201 Von Karman, Suite 1090 Irvine, CA 92612 Tel: 949-263-1888 Fax: 949-263-1338
China - Shenzhen
Microchip Technology Consulting (Shanghai) Co., Ltd., Shenzhen Liaison Office Rm. 1315, 13/F, Shenzhen Kerry Centre, Renminnan Lu Shenzhen 518001, China Tel: 86-755-82350361 Fax: 86-755-82366086
New York
150 Motor Parkway, Suite 202 Hauppauge, NY 11788 Tel: 631-273-5305 Fax: 631-273-5335
France
Microchip Technology SARL Parc d'Activite du Moulin de Massy 43 Rue du Saule Trapu Batiment A - ler Etage 91300 Massy, France Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79
San Jose
Microchip Technology Inc. 2107 North First Street, Suite 590 San Jose, CA 95131 Tel: 408-436-7950 Fax: 408-436-7955
China - Hong Kong SAR
Microchip Technology Hongkong Ltd. Unit 901-6, Tower 2, Metroplaza 223 Hing Fong Road Kwai Fong, N.T., Hong Kong Tel: 852-2401-1200 Fax: 852-2401-3431
Germany
Microchip Technology GmbH Steinheilstrasse 10 D-85737 Ismaning, Germany Tel: 49-89-627-144 0 Fax: 49-89-627-144-44
Toronto
6285 Northam Drive, Suite 108 Mississauga, Ontario L4V 1X5, Canada Tel: 905-673-0699 Fax: 905-673-6509
India
Microchip Technology Inc. India Liaison Office Divyasree Chambers 1 Floor, Wing A (A3/A4) No. 11, O'Shaugnessey Road Bangalore, 560 025, India Tel: 91-80-2290061 Fax: 91-80-2290062
Italy
Microchip Technology SRL Centro Direzionale Colleoni Palazzo Taurus 1 V. Le Colleoni 1 20041 Agrate Brianza Milan, Italy Tel: 39-039-65791-1 Fax: 39-039-6899883
United Kingdom
Microchip Ltd. 505 Eskdale Road Winnersh Triangle Wokingham Berkshire, England RG41 5TU Tel: 44 118 921 5869 Fax: 44-118 921-5820
08/01/02
DS80100C-page 6
(c) 2002 Microchip Technology Inc.


▲Up To Search▲   

 
Price & Availability of PIC16C717

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X